Using The Internal Effects - Yamaha AW2400 Manual

Using the Internal Effects Processors
After applying EQ and dynamics processing to the tracks you may want to
use the internal effects of the AW2400.
The AW2400 has four internal effects processors with forty-three different
presets in each effects processor. Some examples of the presets in these
effects processors would be reverb, delay, chorus, tremolo, and distortion. It is
possible to record the tracks with effects, but typically they are added during the
mixdown process.
Since there are four of these internal effects processors it is not possible
to have a different effect on each track, but you can send as many tracks as
desired to either or both of the effect units.
Recalling a Preset on an Effects Processor
1. Press the [EFFECT SEL] key until the FX1
LIBRARY screen is displayed.
2. Use the [DATA/JOG] to select the desired effect preset.
3. Cursor to the RECALL button on the screen and press the [ENTER] key.
4. Press the [EFFECT SEL] key until the FX1 TRACK screen appears.
21