Ec Declaration Of Conformity - Makita GA7010C Instruction Manual

Noise
The typical A-weighted noise level determined according
to EN60745:
Model GA7010C
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model GA9010C
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model GA7010C
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model GA9010C
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration emis-
sion value may be different.
): 90 dB (A)
pA
): 101 dB (A)
WA
): 91 dB (A)
pA
): 102 dB (A)
WA
): 9.5 m/s 2
h, AG
2
2
): 2.5 m/s
h, DS
2
2
): 6.0 m/s
h, AG
2
2
): 2.5 m/s
h, DS
2
ENG905-1 WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).

EC DECLARATION OF CONFORMITY

For European countries only
The EC declaration of conformity is included as Annex A
ENG900-1
to this instruction manual.
ENG902-1
11