Power Sources; Using The Menu - Sony LMD-150MD Instructions For Use Manual

Power Sources

Connect the supplied AC power cord as illustrated.
Use one of the two AC plug holders (supplied) that
will securely hold the AC plug.
1
Plug the power cord into the AC IN socket on the
bottom of the monitor, then attach the AC plug
holder (supplied) on top of the AC power cord.
AC IN socket
AC plug holder
2
Slide the AC plug holder over the cord until it
locks.
To remove the AC power cord
Pull out AC plug holder by squeezing the left and right
sides.
AC power plug

Using the Menu

The monitor is equipped with an on-screen menu for
making various adjustments and settings.
1
Press the MENU/ENTER key.
The menu appears.
The menu presently selected is shown in yellow.
MENU
Auto Adjust
Brightness
Clock
Position
Contrast
2
Select an item.
Use the + or − key to select the item, then press the
MENU/ENTER key.
3
Make the setting or adjustment on an item.
To increase the number, press the + key.
To decrease the number, press the − key.
Press the EXIT key to restore the original screen.
To clear the menu
Press the EXIT key.
The menu disappears automatically if a key is not
pressed for 10 seconds.
About the memory of the settings
The settings are automatically stored in the monitor
memory.
If no signal is input
If there is no input signal, the POWER indicator lights
in amber.
4
9
(GB)