Wireless Connection (Mirroring) - Canon MP250 User Manual

Wireless Connection (Mirroring)

1.
Tap [Mirroring] on the home screen of the projector.
2.
Turn on the mirroring function on the smart device you want to connect to.
3.
Select "MiniPJ_xxxx" from the selection screen on the smart device you
want to connect to.
The screen of the smart device is projected by the projector once the smart
device and the projector are successfully connected.
Note
• Wireless connection (mirroring) is supported on Android OS (4.2.2 or later) and
Windows 8.1 or later. Please use the HDMI connection on smart devices with any
other OS installed.
• The method for setting the mirroring function differs depending on the smart
device manufacturer.
• If the connection fails while attempting to establish a wireless connection or there
is an error on the screen, cancel mirroring mode and try again. (The connection
may take a while because time is required to stabilize the communication.)
27
MP250 User Guide