Performance Air Flow System; How It Works - GE GSCS3KGYSS Owner's Manual & Installation Instructions

About the temperature controls.
Not all features are on all models.
About TurboCool.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the
freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on
usage and operating environment.
I On some models, setting both controls to the warmest setting until the display flashes (off) will stop
cooling in both the freezer and refrigerator compartments.
I
On other models, setting either control to the warmest setting until the display flashes (off) will stop
the cooling to the freezer and refrigerator.
I NOTE: Turning the refrigerator off via the controls on the touch panel does not shut off electrical power
to the refrigerator.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.

Performance Air Flow System

™
(on some models)

How it Works

TurboCool
TurboCool
TurboCool
How to Use
TurboCool TurboCool
Tc
TurboCool
NOTES:
TurboCool
TurboCool
TurboCool
TurboCool