Cisco Firepower 2100 Getting Started Manual page 123

Firepower Threat Defense Deployment with CDO and Low-Touch Provisioning
The token is added to your inventory.
d) Click the arrow icon to the right of the token to open the Token dialog box so you can copy the token ID
to your clipboard. Keep this token ready for later in the procedure when you need to register the FTD.
Figure 33: View Token
Figure 34: Copy Token
Step 3 In CDO, click Devices & Services, and then select the FTD device that you want to license.
Step 4
In the Device Actions pane, click Manage Licenses, and follow the on-screen instructions to enter the
smart-license generated from Smart Software Manager.
Step 5 Click Register Device. After synchronizing with the device, the connectivity state changes to 'Online'.
You return to the Manage Licenses page. While the device registers, you see the following message:
Step 6
After applying the smart license successfully to the FTD device, the device status shows Connected, Sufficient
License. Click the Enable/Disable slider control for each optional license as desired.
• Expire After—Cisco recommends 30 days.
• Allow export-controlled functionaility on the products registered with this token—Enables the
export-compliance flag if you are in a country that allows for strong encryption. You must select this
option now if you plan to use this functionality. If you enable this functionality later, you will need
to re-register your device with a new product key and reload the device. If you do not see this option,
your account does not support export-controlled functionality.
Cisco Firepower 2100 Getting Started Guide
Configure Licensing
121