Factory Defaults And Troubleshooting; Resetting Factory Defaults - Philips ILS-CL-8RES User Manual

Factory Defaults and Troubleshooting

Resetting Factory Defaults

To set the unit back to its Factory Defaults, do the following:
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
Step 1. Press and hold A and H for 3 or more
seconds. (All LEDs will start to blink.)
Step 2. While still holding A/H buttons, also press
and hold C. After another 3 seconds, unit
will reset back to its Factory Defaults.
Factory Defaults are as follows:
• Unit Mode = 3 (RCGP Master)
• Unit ID = 0 (Disabled)
• LED intensity = 75%
• All Room Combine Switch ID's set
to 0.
Room Combine Switch User's Guide
17