Cisco TelePresence MX200 G2 Quick Reference Manual page 2

Sharing content
Make sure your presentation source is switched on and connected to
the video system before you tap Presentation.
Connect your source and
make sure it is switched on.
Tap Share (a), then scroll
horizontally (b) to locate
the presentation source, if
needed. Once located tap
the required source.
Tap the three small dots ( ... ),
to acess the menu allowing
you to preview or to share
the content of the selected
source.
Tap Preview, if you want to
check what you will share
before you share it, and then
tap Share to actually start
sharing the content of your
source.
Your content will now be
viewable by all connected
participants. To stop sharing
content tap Stop Sharing, as
shown.
D1507704 Quick Reference Guide MX200 G2/MX300 G2/MX700/MX800/SX10/SX20 SX80 TC7.3 Dec. 2014
A tour of the Touch pad
Tap the touch screen
to wake up the system,
if needed.
Tap the upper left corner to
activate /deactivate the Do not
disturb feature, to activate /
deactivate the Standby feature, and
to access the Settings.
Tap Dial to Tap Contacts to
invoke the invoke the list of
dial pad. contacts including
Directory and
Cisco TelePresence MX200 G2/MX300 G2/MX700/MX800/SX80
Tap a button
to activate its
function.
Tap the ? to Tap the Camera
contact or icon to activate
access the Help
desk, if available. camera settings.
Tap Meetings Tap
to invoke a list Messages
of upcoming to invoke the
Favorites, scheduled voice mail
meetings. system, if
History. applicable.
Quick Reference Guide
Scroll in lists
as on a smart
phone.
self-view and
Time of day is
indicated in the
upper right corner.
Tap
Presentation
to start sharing
content and
to conduct
presentations.
Press the
Microphone
button to
mute / unmute
Press and hold
microphone.
the left side of the
Volume button
to decrease the
loudspeaker volume
and the right side to
increase the volume.