Before You Begin
This guide describes how to assemble the housing and its
optional components, affix the camera, and mount the assembly
to a suitable surface. Please carefully read this guide before you
install the housing.
Keep this guide for future reference.
Unpack Everything
Check that the items received match those listed on the order form and packing slip.
The HHC12 packing box includes, in addition to this guide:
Housing Model
HHC12WM
HHC12WM2
If any parts are missing or damaged, contact the dealer you purchased the housing
from or call Honeywell Customer Service (see back cover).
Equipment Required
You may require the following tools (not supplied) to complete the installation:
Screwdriver, camera and camera cable, power supply
Rev A
Packing Includes
•
One 12-inch housing with sunshield
•
One desiccant bag
•
One HHMW13 wall mount
•
Four 1/4 x 20 UNC machine screws
•
Four #14 1-1/4 sheet metal screws
•
One 12-inch housing with heater, blower and sunshield
•
One desiccant bag
•
One HHMW13 wall mount
•
Four 1/4 x 20 UNC machine screws
•
Four #14 1-1/4 sheet metal screws
8
Document 800-04354
04/09