Connection And Setup; 4K System Connection - Sony BPU4500A Operation Manual

Connection and Setup

4K System Connection

A 4K format camera system is formed by connecting the unit
1)
to a video camera (F65 or PMW-F55
CA4000, HDC4300, or HDC-P43) and HDCU2000/2500
Camera Control Unit (CCU) using optical fiber cables.
1) Requires the SKC-4065 F65 Adaptor.
2) Requires PMW-F55 software version 2.10 or later.
Functions provided by the CCU (genlock, power supply to the
video camera, and various interface functions) can be used as-
is.
Connection example
BPU
INTERCOM AUDIO IN DC IN
PUSH PUSH
DC OUT
AES/EBU
LINE MIC
+48V
OFF
RET CTRL TRACKER REMOTE AUX
SDI-MONI
CA4000
SDI Monitor/Prompter
(digital)
3G SDI/HD SDI
monitor
3G/HD SDI OUT
HD SDI Monitor
HD SDI OUT
Monitor
(4K Single-Link)
V
Only one can be
Monitor
used.
(4K Quad-Link)
The above diagram shows the unit with the SKC-IP45AF (option) installed.
For details about assignment of BNC connectors, see "Relationship
Between Operation Mode and Output Format" (page 22).
2)
with mounted
Optical fiber cable
Prompter (analog)
PROMPTER1
PROMPTER2/MONITOR
SDI OUT
1
REFERENCE
REMOTE
IN
HD SDI OUT 3G/HD SDI OUT SDI OUT 1 SDI OUT 2
SLOT4 SLOT3 SLOT1
SLOT2 SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6
SDI SDI SDI
OUT 1 OUT 2 OUT 4
Return signal input
HD signals down-converted from the 4K signal can be output
from SLOT3, SLOT4, and the CCU.
Note
12G/6G-SDI signal output is supported only from the following
connectors.
• SDI OUT 1 connector of SLOT1
• SDI OUT 1 and SDI OUT 2 connectors of SLOT2
Network Switch
2 3 4
CAMERA
SDI1 SDI2
SDI OUT 3 SDI OUT 4
SDI OUT 7 SDI OUT 8
SDI SDI
Reference signal input
OUT 6 OUT 8
Prompter signal input
HD PROMPTER IN
RETURN INPUT
SDI 1-4
Hub
14
Switcher
(4K Quad-Link)
CAMERA
CCU
CCU
Optical fiber cable
REFERENCE CAMERA
LAN
HDCU2000/2500 (CCU)
MSU-1000/1500
Master Setup Unit
RCP-3000/1000 series
Remote Control Panel
BPU4500A