Removing Thermal Board, Ir Sensor Board And Fan Duct - Toshiba TDP-MT400 Service Manual

2-7 Removing Thermal Board, IR Sensor Board and Fan
Duct
1. Unscrew 1 screw to remove the Thermal Sensor Board.
2. Turn over the Bottom Cover Module; then, unscrew 1 screw to remove the IR Sensor Board.
3. Unscrew 1 screw to remove the Fan Duct from the Bottom Module.
Screw Bit (+) : 107
Thermal Board
Screw Bit (+) : 107
one screw
2-10
IR Sensor Board
Fan Duct
Screw Bit (+) : 107
Toshiba Series