2-5 Removing Interrupter Switch, Engine Module, Fan
Module and DMD Board
1.
Unscrew 2 screws to remove the Interrupter Switch.
2.
Tear off the Deflector Tinplate and then unscrew 5 screws to remove the Brackets.
3.
Unscrew 6 screws of the red rectangle area and then remove the Engine Module.
Screw Bit (+) : 102
Interrupter Switch
Screw Bit (+) : 102
Screw Bit (+) : 107
2-7
Engine Module
Toshiba Series