SMB Rack
Use
Assembly of the Fixation Device
Figure 10. Assembly of optional Fixation Device
Attach the Fixation Device with one M10x70 bolt
(Art.No. 100227) and lock nut (Art.No. 100027).
The attachment hole is placed asymmetrically making
it impossible to mount the Fixation Device in the
wrong direction.
Note that the locking pin (Art.No 1910) in the top
cannot be put to place until the SMB Rack is stacked
with SMBs, to secure them, according to Figure 11.
During stacking the nets this locking pin can be stored
in one of the corner tubes.
13