Table of Contents
Advertisement
Use
SMB Rack
Method 2
This method is used when absolute maximum number
of barriers must be stacked in each Rack.
Place every second barrier in the opposite direction,
i.e. every second net with the toe board upwards
according to Figure 7, (Picture showing optional
Fixation Device).
Make sure that the barriers are placed centered in the
Rack to avoid overturning. With this method 50 SMBs
can be stacked in the SMB Rack, dependent of the
condition of the SMBs (Figure 8).
Figure 7. Stacking acc. to method 2
50x
Figure 8. Rack fully stacked with 50 SMBs.
10
Advertisement
Table of Contents
