Condition With Zone Events Fault; Condition With Excluded Zone Events - Honeywell NOTIFIER LCD6000A Installing Manual

Condition with zone events fault

The following screen is shown when the control panel is in fault condition. Also fault events are initially
shown by zone.
Date and time
of the first
zone fault
event
First event
visualization area
With the arrows  you can scroll the list of fault zones.
If more zones are in fault condition, to show specific zone devices, you must scroll down the list until the
chosen one is in "first event visualization area".
Pressing key you can enter the list of faulted points of the selected zone.
With the arrow keys  you can scroll down the list of devices in fault condition.

Condition with excluded zone events

The following screen is shown when in the control panel excluded zones are present and it's programmed to
show exclusion signalling on LCD-6000A.
PAGE - 8
NOTIFIER ITALIA
Installing manual
Doc. M-185.1-LCD6000A-ENG Rev A.1
Fault zones
counter
The presence of an excluded zone in the
control panel is shown on LCD-6000A by
the symbol " ! " on the display.
LCD6000A
LCD6000A_manu