Switching Between The D Term Cordless Lite And The Multiline Terminal - NEC Dterm Cordless Series Manual

All manuals and user guides at all-guides.com
NEC America, Inc.
Switching Between the
Multiline Terminal
When the D
Terminal the following is applicable:
Switching between cordless and desk mode must be
done while both terminals are idle.
A call in progress cannot be switched between the D
Cordless Lite and the associated Multiline Terminal.
Switching held calls between the D
the associated Multiline Terminal is not recommended
since line key LED indications will not be provided.
Use the base unit on the D
between the D
Press Cordless to select the D
-OR-
Press Desk to select the Multiline Terminal. (Refer to
4-5 Cordless and Desk
Note:
term
D Cordless Lite
Owner's Manual
term
D
term
Cordless Lite is associated with a Multiline
term
term
Cordless Lite and the Multiline Terminal.
term
Buttons.)
term
The D Cordless Lite display indicates "DESK
TEL" when the Multiline Terminal is connected.
Figure 4-5 Cordless and Desk Buttons
Issue 1
and the
Cordless Lite
term
Cordless Lite and
Cordless Lite to switch
Cordless Lite .
Figure
term
4 - 7