Download Print this page

Sharp K-60P19BNM-EU User Manual page 153

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 134
CLEANING AND
MAINTENANCE OF YOUR
OVEN
CLEANING
Before starting to clean your oven, be
sure that all control buttons are off and
your appliance has cooled down. Unp-
lug the appliance.
Do not use cleaning materials conta-
ining particles that might scratch the
enamelled and
painted parts of your oven. Use cre-
am cleaners or liquid cleaners, which
do not contain particles. As they might
harm the surfaces, do not use caustic
creams, abrasive cleaning powders, ro-
ugh wire wool or hard tools. In the event
the excess liquids spill over and your
oven should burn, this may cause da-
mage to the enamel. Clean up the split
liquids immediately. Do not use steam
cleaners to clean the oven.
Cleaning the interior of the
oven
Make sure to unplug the oven before
you start cleaning it. You will obtain best
results if you clean the oven interior whi-
le the oven is slightly warm. Wipe your
oven with a soft piece of cloth dam-
pened with soap and water after each
use. Then wipe it again, this time with a
wetted cloth, and wipe it dry. Complete
cleaning using dry and powder type cle-
aners. For product with catalytic enamel
frames, the rear and side walls of the
inner frame do not require cleaning. Ho-
wever; depending on usage, replacing
them after a certain period of time is re-
commended.
MAINTENANCE
Replacing the Oven Light
The change of oven lamp must be done
by by an authorized technician. The ra-
ting of the bulb should be 230V, 25Watt,
Type E14,T300 before changing the
lamp, the oven should be switched off
and it should be cool.
The lamp design is specific for use in
household cooking appliances and it is
not suitable for household room illumi-
nation.
EN - 21

Advertisement

loading