Optional Accessories - Makita UH200D Instruction Manual

Put the blade cover on the shear blades so that the
blades are not exposed. Store the tool out of the reach
of children carefully.
Store the tool in the place not exposed to water and rain.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
1
1. Grass shear blade
2. Grass shear blade cover
3. Storage case
4. Base frame
011042
Long handle attachment (for Grass Shear)
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before carrying out
any work on the tool.
or attachments
Only use accessory or
2
Hedge shear blade cover
•
Hedge shear blade assembly
•
Chip receiver for hedge trimming
•
Makita genuine battery and charger
•
For cordless grass shear use
This tool can be used as a grass shear by using the
grass shear blade (optional accessory) and 2-way
change set.
To use this tool as a grass shear, replacing the hedge
shear blades with the grass shear blades is required.
For removing the hedge trimmer blades, refer to the
aforementioned section titled "Removing the hedge
shear blades".
are
For installing the grass shear blade, refer to the section
below titled "Installing or removing grass shear blades".
Grass shear blade assembly (for Grass Shear)
•
2-way change set consisting of the following three
•
accessories
Grass shear blade cover (for Grass Shear)
•
Storage case (for blade bottom section)
•
Base frame (for Grass Shear)
•
3
Installing or removing blade cover
CAUTION:
Be careful not to contact the shear blade when
•
installing or removing the blade cover. Contacting
the shear blade may cause personal injuries.
Fig.26
Fig.27
Slide the blade cover from the tool's side until the shear
blade completely hides itself and then push in it lightly
towards the tool from the front.
To remove the blade cover, take the above installation
procedure in reverse.
15
4