Using The Software; Using The Isis/Twain Driver; Using Captureperfect - Canon Microfilm Scanner 350II Instructions Manual

CE-IE-335-01
1. Turn on the scanner.
2. Turn on your computer. Windows starts.
3. Click the "Start" button, and then click "Programs" (when using
1. On the File menu, click Exit.
31

Using the software

Using the ISIS/TWAIN Driver

The ISIS/TWAIN driver help menu describes how to use the ISIS/
TWAIN driver. To access the ISIS/TWAIN driver help, click Start
- Programs (when using Windows XP, click All Programs) - Canon
Document Scanner - Canon MS300/350 Help, or click the Help
button displayed in the dialog box.

Using CapturePerfect

Follow the procedure described below to start and close
CapturePerfect.
The basic method for scanning using CapturePerfect
is described in the CapturePerfect help. From the Help
menu on the CapturePerfect menu bar, click Help, then
refer to the explanation of how to use CapturePerfect.
Starting CapturePerfect
Windows XP, "All programs") – "CapturePerfect 1.0" –
"CapturePerfect 1.0."
"Multi Scan Setting" and "Multi Scan Start" are functions for
users who connect the Microfilm Scanner 350 via SCSI at the
end of a Microfilm Scanner 350 chain to use it as a multi scan-
ner. For details, refer to the Microfilm Scanner 350 Instructions.
"CapturePerfect 1.0" starts up.
To start CapturePerfect 1.0 Help, click "Help" from the
Help menu on the CapturePerfect menu bar.
Refer to CapturePerfect 1.0 Help on how to use
CapturePerfect 1.0.
Closing CapturePerfect
CapturePerfect closes.
When the scanner is scanning or some operation is
pending after scanning has been started (such as when
scanning has been interrupted), the mouse pointer
changes to an hourglass. If the mouse pointer appears
as an hourglass while the scanner is not scanning, the
previous scanning operation has not been completed.
On the File menu, click Cancel Scanning to cancel
hourglass display, then close CapturePerfect.
07.5.14, 14:19
ABOUT THE SOFTWARE
31