Keyboard Keys - Canon Microfilm Scanner 350II Instructions Manual

BEFORE YOU BEGIN ...
9 Function keys
!0 Cassette Select key
!1 Auto Rotate key
!2 Zoom keys
!3 Rotate keys
!4 Reset key
!5 Film Control knob (optional)
!6 Adjust Mode indicators
!7 Image Adjust Select key
!8 Image Adjust Control dial
16
CE-IE-335-01

Keyboard keys

This is a summary of the keyboard keys.
The following functions are assigned on the respective keys
before factory shipping. For details, refer to P.39 "Setting the
function keys (DMP mode)."
Selects paper cassette for printing when the scanner is con-
nected with the Fileprint 470.
Rotates the image 90 degrees for printing.
Use these keys to register zoom settings. During normal
operation, you can immediately switch to one of the registered
settings by pressing the key.
Press this key to rotate the image left or right by 90 degrees.
Use this key to restore or change default settings.
Transports film through a motorized carrier. Turn the knob
right to advance the film forward, or left to rewind it. (Note
that this knob cannot be used with the FS Controller I.)
The illuminated lamp identifies the type of image adjustment
you can make. You can switch the adjustment type by pressing
the Image Adjust Select key.
Selects the type of adjustment you can make: Zoom magnifica-
tion, Focus, or Rotation.
Use this dial to adjust the magnification, focus or rotation.
16
P1: DATE
P2: NOTE
P3: PICTURE
P4: SHARPNESS
07.5.14, 14:19