PCM-D100
2-2.
GUARD (MIC)
N
N
Note: When installing the guard (MIC), insert firmly it and
Note: When installing the guard (MIC), insert firmly it and
check that align the screw hole and panel (front) hole.
check that align the screw hole and case hole.
OK
NG
OK
NG
Screw holes are aligned.
Screw holes are not aligned.
Screw holes are aligned.
Screw holes are not aligned.
3 guard (MIC)
UFOELK - 2/21/2018 5:48 PM
2 two screws
1 two caps (MIC guard)
(M1.4)
2 two screws
1 two caps (MIC guard)
(M1.4)
7