Items To Set - Sony S-Frame DPF-VR100 Handbook

Items to set

Item Setting
Picture mode Portrait
Standard*
Vivid
Alarm Settings Sets the alarm function (page 41).
Auto Power Sets the timer function which turns the power of the photo frame on or off automatically.
ON/OFF You can use this function with the following settings (page 39).
Note
The default Auto Power ON/OFF setting may differ in some regions.
Advanced*
Simple
Auto off
OFF
Date/time Sets the Date, Time, First day of the week, etc. (page 14).
Settings
44 GB
Description
Displays an image with optimum contrast and natural
color.
Displays an image impressively and with enhanced
color.
Displays an image more vividly using high chroma
saturation and sharpness.
You can set the auto power on/off time in one-hour increments for each
day of the week.
OK If you press this button after setting the auto power on/
off time or day of the week, the setting is confirmed
and the previous screen is restored.
Cancel If you press this button after setting the auto power on/
off time or day of the week, the operation is canceled
and the previous screen is restored.
Reset all If you press this button after setting the auto power on/
off time or day of the week, all the setting times are
deleted.
You can set the auto power on/off time in one-minute increments
(page 39).
Power-ON You can set the timer (time/day of the week) for when
timer the power is to be turned on automatically.
Power-OFF You can set the timer (time/day of the week) for when
timer the power is to be turned off automatically.
You can specify two or four* hours after power on at which the photo
frame is to shut itself off if any button on the photo frame is pressed.
The Auto Power ON/OFF function is not activated.
*: Factory default settings