Printed Results - Sony S-Frame DPP-F800 Operating Instructions Manual

Printing
Symptom Check item
Paper does not • Is the print paper properly
feed.
• Are you using print paper
The print paper is • Is the perforation of the print
ejected without
being printed.
• Are you using print paper

Printed results

Symptom Check item
The printed • Did you print preview image
pictures are
inferior in quality.
• Did you print an image
• Did you use the Editing
set in the paper tray?
that was not designed for this
unit?
paper removed?
that was not designed for this
unit?
data?
whose size (width or height)
is smaller than 480 dots?
menu to enlarge the image?
Cause/Solutions
c If print paper is not properly loaded, this
unit may develop trouble. (.page 34)
Check the following:
• Insert the correct set of print paper and
ink ribbon.
• Load the print paper in the correct
direction in the tray.
• You can insert a maximum 20 sheets of
print paper into the tray. If the sheets
exceed 20, remove the extra sheets.
• Riffle the print paper thoroughly and
insert it into the tray.
• Do not bend or fold the print paper
before printing, as this may cause
malfunctions of this unit.
c Use print paper designed for this unit. If
you use incompatible print paper, this unit
may develop trouble. (.About the
Print Packs)
c Use print paper designed for this unit. If
you use incompatible print paper, this unit
may develop trouble. (.About the
Print Packs)
Cause/Solutions
c Depending on the type of digital camera
used, preview images may be displayed
along with the primary images in the
thumbnail list. The printed quality of the
preview images will not be as good as the
primary images. Note that if you delete
the preview images, the data for the
primary images may be damaged.
c When an image is displayed in a small
size with a black frame, printing quality is
rough due to this small image size.
c An enlarged image, depending on its
image size, will be printed with
deteriorated picture quality.
Continued
GB
91