Information Displayed On The Lcd Monitor - Canon PowerShot S330 Digital ELPH User Manual

30
Basic Functions
Replay Mode

Information Displayed on the LCD Monitor

Shooting Mode
In shooting mode, information about the current settings and
remaining image capacity will display on the LCD monitor for
approximately six seconds when the actions below are taken,
regardless of whether the LCD monitor is set to On or Off.
• The power is turned on.
• The
• The camera settings are changed.
• The Rec., Setup or My Camera menu is closed.
While this information is displayed, you may set the flash,
continuous mode, self-timer, macro and infinity settings.
• After you press the shutter button and take a shot, the
recorded image appears on the LCD monitor for 2 (or 10)
seconds. (It will continue to display if you press the
button while it is shown on the screen.) While it is displayed,
you can check the exposure with the graph (see Histogram,
p. 32) that shows the distribution of the brightness data.
(Press the
information is not shown) If the exposure requires
adjustment, set the exposure compensation and reshoot.
( on the mode dial)
• The LCD monitor will turn on when the
• In replay mode, pressing the
, , / , /
button if the histogram and other
mode dial is set to the
button cycles between display modes.
Single Image Replay
Standard Detailed
Multi Image Replay (9 Images)
Standard
or button (
position.
No Display
No Display
mode) is pressed.