Canon PowerShot S330 Digital ELPH User Manual page 145

Problem
Subject in recorded
image is too bright
Flash does not fire
Image not showing
on TV monitor
Zoom does not
work
Cause
Light is shining
directly on the
subject or reflected
off the subject into
the camera
Flash is set to on
Flash is set to off
Incorrect video
system setting
Shooting mode set
to (Stitch
Assist)
Zoom button
pressed during
movie recording
Solution
• Change the shooting angle.
• Set the flash to [Off].
• Set the flash to [On].
• Set the video system to the
appropriate setting, NTSC or
PAL, for your TV (p. 118).
• The output will not appear on a
TV monitor in
mode. Shoot in a different
mode.
• Adjust the zoom before
shooting a movie.
143
Appendices
(Stitch Assist)