Table of Contents
Advertisement
CHAPTER -3: USING YOUR FRIDGE
Control panel
Fridge temperature
set button
If your product has lighting
When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening
tests.
Fridge partition temperature setting button
This button allows setting temperature of the fridge. In order to set values for fridge partition, press this button. Use this
button also to activate Super Cooling mode.
Alarm light
A red LED indicates a problem with the fridge. Please see the troubleshooting section in this manual.Super cooling
mode
When would it be used?
• To cool large quantities of food.
• To cool fast food.
• To cool food quickly.
• To store seasonal food for a long time.
How to use?
• Press the temperature set button until the super cooling light comes on.
• The super cooling led will light during this mode.
• For optimal appliance performance with maximum cooling capacity, set the appliance to active Super
Cooling mode 6 hours before you put the fresh food into the fridge.
During this mode:
If you press the temperature set button, the mode will be cancelled and the setting will be restored to 2.
Note: "Super cooling" mode will be automatically cancelled after 6 hours or when cooling sensor temperature
drops beneath 2 °C.
Fridge temperature settings
• The initial temperature of the Setting Display is 5°C.
• Press the fridge setting button once.
• Every time you press the button, the setting temperature will increase. (2°C, 4°C, 5°C, 6°C, 8°C, super cooling)
• If you press the fridge setting button until super cooling symbol is displayed on your fridge
- and you do not press any button within the following 3 seconds,
- the super cooling indicator will blink.
• If you keep on pressing, it will restart from last value.
Warnings for temperature settings
• The ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the
temperature in the refrigerator compartment. If required,change the temperature setting.
• The temperature setting should be set by taking into consideration how often the fridge door is opened and
closed, how much food is stored in the fridge and the environment in which and the positioning of the appliance.
• We recommend that when first using the fridge it should be left running for 24 hours uninterrupted to ensure it
is completely cooled. Do not open the fridge door, or put food inside for this period.
• Your fridge has a 5 minute built in delay function, designed to prevent damage to the compressor. When power
is applied to your fridge, it will begin to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the standards, according
to the climate class stated in the information label. It is not recommended that your fridge is operated in the
environments which are out of the stated temperature intervals in terms of cooling efficiency.
Climate class and meaning:
T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to
38 °C.
N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to
Super Cooling Mode
alarm indicator led
EN -7-
Fridge temperature
indicator
Advertisement
Table of Contents
