Chapter -6: Tips For Saving Energy; Chapter -7: Information For Test Institutes - Sharp SJ-LF300E00X-EN User Manual

Table of Contents

Advertisement

CHAPTER -5: TROUBLESHOOTING
• The door is closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) Noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of the appliance material).
Short cracking: Heard when the thermostat switches the compressor on/off.
Compressor noise: Normal motor noise. This noise means that the compressor is operating normally. The
compressor may cause more noise for a short time when it is activated.
Bubbling noise and splash: This noise is caused by the flow of the refrigerant in the tubes of the system.
Water flow noise: Normal flow noise of water flowing to the evaporation container during defrosting. This
noise can be heard during defrosting.
Air Blow Noise: Normal fan noise. This noise can be heard in fridges during normal operation of the system
due to the circulation of air.
If the edges of the fridge
Especially in summer (hot weather), the surfaces may get warmer during the operation of the compressor, this is
normal.
If humidity builds up inside the fridge;
• Are all food packed properly? Are the containers dried before placing them in the fridge?
• Is the fridge door opened frequently? Humidity of the room gets in the fridge when the door is opened. Humidity
build up will be faster when you open the door more frequently, especially if the humidity of the room is high.
If the door is not opened and closed properly;
• Do the food packages prevent closing of the door?
• Are the door compartments, shelves and drawers placed properly?
• Are door joints broken or torn?
• Is your fridge on a level surface?
Recommendations
• To stop the appliance completely, unplug from main socket (for cleaning and when the door is left open)

CHAPTER -6: TIPS FOR SAVING ENERGY

1. Always allow food to cool before storing in the appliance.
2. Thaw food in the fridge compartment, this helps save energy.

CHAPTER -7: INFORMATION FOR TEST INSTITUTES

Appliances for EcoDesign verification should be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual
Chapter 2. Please contact the manufacturer for any other further information, including loading plans.
cabinet that adjoin the door are warm;
EN -10-
in

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sj-lf300e01x-en

Table of Contents