Network Settings - Sony Bravia KDL-40X4500 Operating Instructions Manual

CA Module Set-up

Network Settings

Network
Server Display
Settings
Server Diagnostics
Renderer Function
Renderer Access
Control
Renderer Set-up
48
GB
Auto DST Sets whether or not to automatically switch between summer
time and winter time.
Off
On
Provides access to a pay TV service after you obtain a Conditional Access Module
(CAM) and a view card. See page 21 for the location of the
IP Address Manual
Settings
DHCP (DNS
manual)
DHCP (DNS
automatic)
Test Diagnoses whether the network is correctly connected.
IP Address/ You need to configure each item when "Manual" is selected
Subnet Mask/
in "IP Address Settings".
Default Gateway/ When "DHCP (DNS manual)" is selected, be sure to enter
Primary DNS/
"Primary DNS" and "Secondary DNS" server addresses
Secondary DNS manually.
MAC Address Displays the MAC address, which is a fixed, globally unique
identifier of the network device.
Displays the connected server list and allows you to select the server you want to
display on the Home Menu.
Diagnoses whether the TV can connect to each server on the home network.
Enables playback of photos or music on the TV through other control devices on
the network, such as a digital still camera or mobile phone.
Allows you to specify the accessible controller to the TV. When this setting is set to
"On", you can playback photos or music on the TV using the controller.
Automatic
Allows you to select whether to permit access to the TV
Access automatically when a network device accesses the TV for the
Permission first time.
Renderer Name
Allows you to set the name of the TV to be shown on the
controller.
Displays the time according to the time
difference set in "Time Zone".
Automatically switches between summer
time and winter time according to the
calendar.
(PCMCIA) socket.
Allows you to set the network settings
according to your network environment.
Automatically acquires the network
settings except for DNS server settings.
You can manually set the DNS settings.
Automatically acquires the network
settings through the Dynamic Host
Configuration Protocol server function of
the router or Internet service provider.