HIKVISION DS-K1T673 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T673
  6. User manual
HIKVISION DS-K1T673 User Manual

HIKVISION DS-K1T673 User Manual

Hide thumbs Also See for DS-K1T673:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T673 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-K1T673

Summary of Contents for HIKVISION DS-K1T673

  • Page 1 DS-K1T673 Series Face Recognition Terminal User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K1T673 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T673 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T673 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K1T673 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T673 Series Face Recognition Terminal User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
  • Page 9 DS-K1T673 Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T673DX 13.56 MHz Card Presenting Frequency DS-K1T673DWX 13.56 MHz Card Presenting Frequency, Wi-Fi DS-K1T673TDX 13.56 MHz Card Presenting Frequency DS-K1T673TDWX 13.56 MHz Card Presenting...

  • Page 10: Table Of Contents

    DS-K1T673 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 1.2.1 Features (Normal Series) ....................1 1.2.2 Features (T Series) ......................2 Chapter 2 Appearance ........................ 4 Chapter 3 Installation ......................... 6 3.1 Installation Environment ......................
  • Page 11 DS-K1T673 Series Face Recognition Terminal User Manual 6.1 Select Language ........................34 6.2 Set Application Mode ......................36 6.3 Privacy Settings ........................37 6.4 Set Administrator ......................... 38 Chapter 7 Basic Operation ......................41 7.1 Login ............................ 41 7.1.1 Login by Administrator ....................41 7.1.2 Login by Activation Password ..................
  • Page 12 DS-K1T673 Series Face Recognition Terminal User Manual 7.5.1 Authenticate via Single Credential ................61 7.5.2 Authenticate via Multiple Credential ................62 7.6 Basic Settings ........................63 7.7 Set Biometric Parameters ....................65 7.8 Set Access Control Parameters .................... 67 7.9 Time and Attendance Status Settings .................. 68 7.9.1 Disable Attendance Mode via Device .................
  • Page 13 DS-K1T673 Series Face Recognition Terminal User Manual 8.5.6 Upgrade and Maintenance ..................83 8.5.7 Log Query ........................85 8.5.8 Security Mode Settings ....................85 8.5.9 Certificate Management ..................... 86 8.5.10 Change Administrator's Password ................87 8.5.11 View Device Arming/Disarming Information ............87 8.5.12 Network Settings .......................
  • Page 14 DS-K1T673 Series Face Recognition Terminal User Manual 9.4.1 Add Organization ...................... 119 9.4.2 Import and Export Person Identify Information ............119 9.4.3 Get Person Information from Access Control Device ..........122 9.4.4 Issue Cards to Persons in Batch ................. 122 9.4.5 Report Card Loss .......................

  • Page 15: Chapter 1 Overview

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.

  • Page 16: Features (T Series)

    DS-K1T673 Series Face Recognition Terminal User Manual Support mask wearing detection ● Support tamper alarm, door opening alarm by external force, duress card and duress password ● alarm Support multiple display modes, including normal mode, advertisement mode, and simple mode ●...
  • Page 17 DS-K1T673 Series Face Recognition Terminal User Manual Multiple authentication card types ● Support multiple people recognition (up to 5 people) ● Support mask wearing detection ● Supports tamper alarm, door opening alarm by external force, duress card and duress password ●...

  • Page 18: Chapter 2 Appearance

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Name IR Light Type-C USB Interface...
  • Page 19 DS-K1T673 Series Face Recognition Terminal User Manual Name Note For connecting to the peripheral module. IR Light Camera Breathing Light Loudspeaker Wiring Terminal Temperature Module Interface Debugging Port (For debugging only) Network Interface Audio Output Note If the audio plug diameter is greater than 8 mm, an external adapter is required.

  • Page 20: Chapter 3 Installation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ● If you have to install the device outdoors, you should install a protective shield (optional) for the ●...
  • Page 21 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-1 Install Gang Box 2. Secure the mounting plate on the gang box with 2 supplied screws (SC-K1A4X24_5).
  • Page 22 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-2 Install Mounting Plate 3. Route the cable through the cable hole, wire the cables and insert the cables in the gang box.
  • Page 23 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-3 Secure Device Note Apply Silicone sealant among the cable wiring area to keep the raindrop from entering. 4. Align the device with the mounting plate, and secure the device on the mounting plate with 1...

  • Page 24: Surface Mounting

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-4 Secure Device 5. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.3 Surface Mounting Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation.
  • Page 25 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-5 Mounting Template 2. Drill holes on the wall or other surface according to the Hole 1 on the mounting template. 3. Remove the cable hole on the mounting plate with tools.
  • Page 26 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-6 Install Mounting Plate 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding peripherals cables. Note If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid...
  • Page 27 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-7 Apply Silicone Sealant 6. Align the device with the mounting plate and hang the device on the mounting plate. Figure 3-8 Hang Device 7. Use 1 supplied screw (KM3×6) to secure the device and the mounting plate.

  • Page 28: Mount With Bracket

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-9 Secure Device 8. Optional: Connect the peripheral module according to your actual needs. 9. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.
  • Page 29 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-10 Drill Holes on Turnstile 2. If the installation angle needs to be 180° perpendicular to the body of the turnstile, the following operations are required. 1) Take off the 3 screws shown in the following figure.

  • Page 30: Mount Bracket

    DS-K1T673 Series Face Recognition Terminal User Manual 3.4.2 Mount Bracket Steps 1. Pass the bracket bottom through the turnstile, and fix it into the turnstile with self-contained nut. Adjust the bracket to the suitable angle, and fix the nut tightly by the wrench.
  • Page 31 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-14 Fix Mounting Plate 3. Pass face recognition terminal cables through the cable hole, and insert them into the inner turnstile. Fix the face recognition terminal into the mounting plate with KM3×6-H2-SUS screws.
  • Page 32 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-15 Fix Face Recognition Terminal 4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.

  • Page 33: Chapter 4 Wiring

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 4 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below.
  • Page 34 DS-K1T673 Series Face Recognition Terminal User Manual Figure 4-1 Terminal Diagram The descriptions of the terminals are as follows:...

  • Page 35: Wire Normal Device

    DS-K1T673 Series Face Recognition Terminal User Manual Table 4-1 Terminal Descriptions Group Function Color Name Description Group A Power Input +12 V 12 VDC Power Supply Black Ground Group B Alarm Input Yellow/Blue Alarm Input 1 Black Ground Yellow/Orange IN2...

  • Page 36: Wire Secure Door Control Unit

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 4-2 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.

  • Page 37: Wire Fire Module

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 4-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering Off...
  • Page 38 DS-K1T673 Series Face Recognition Terminal User Manual Figure 4-4 Wire Device Figure 4-5 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal...

  • Page 39: Wiring Diagram Of Door Locked When Powering Off

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 4-6 Wiring Device Figure 4-7 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 40 DS-K1T673 Series Face Recognition Terminal User Manual Scenario: Installed in Entrance/Exit with Fire Linkage Note The Uninterpretable Power Supply (UPS) is required. ● The fire system (NC and COM, normally closed when powering off) is connected with the lock ●...
  • Page 41 DS-K1T673 Series Face Recognition Terminal User Manual Figure 4-9 Wiring Diagram...

  • Page 42: Chapter 5 Activation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 43 DS-K1T673 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least...

  • Page 44: Activate Via Web Browser

    DS-K1T673 Series Face Recognition Terminal User Manual characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

  • Page 45: Activate Via Sadp

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 46: Activate Device Via Ivms-4200 Client Software

    DS-K1T673 Series Face Recognition Terminal User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 47 DS-K1T673 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 48: Chapter 6 Quick Operation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system.
  • Page 49 DS-K1T673 Series Face Recognition Terminal User Manual Figure 6-1 Select System Language By default, the system language is English. Note After you change the system language, the device will reboot automatically.

  • Page 50: Set Application Mode

    DS-K1T673 Series Face Recognition Terminal User Manual 6.2 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list. Figure 6-2 Welcome Page...

  • Page 51: Privacy Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Note You can also change the settings in System Settings. ● If you install the device indoors near the window or the face recognition function is not ● working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by ●...

  • Page 52: Set Administrator

    DS-K1T673 Series Face Recognition Terminal User Manual Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Save Captured Pic. When Auth. (Save Captured Picture When Authenticating) If you enable this function, you can save the picture when Authenticating to the device.
  • Page 53 DS-K1T673 Series Face Recognition Terminal User Manual Figure 6-4 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm.
  • Page 54 DS-K1T673 Series Face Recognition Terminal User Manual Hik-Connect is enabled/disabled. The device wired network is connected/not connected/connecting failed. The device' Wi-Fi is enabled and connected/not connected/enabled but not connected. Shortcut Keys Description Note You can configure those shortcut keys displayed on the screen. For details, see Basic Settings .

  • Page 55: Chapter 7 Basic Operation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 56 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face, fingerprint or card to enter the home page.

  • Page 57: Login By Activation Password

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login.
  • Page 58 DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page. 2. Enter the password. - If you have added an administrator for the device, tap and enter the password.

  • Page 59: Communication Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 7.2 Communication Settings You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand parameters, ISUP and access to Hik-Connect on the communication settings page. 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IPv4/IPv6 IP address, the subnet mask, the gateway, and DNS parameters.
  • Page 60 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-4 Wired Network Settings 3. Set IPv4/IPv6 IP Address, Subnet Mask, and Gateway. - Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically. - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.

  • Page 61: Set Wi-Fi Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Note The device's IP address and the computer IP address should be in the same IP segment. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server.
  • Page 62 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-5 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And...

  • Page 63: Set Rs-485 Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters. - By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically.

  • Page 64: Set Wiegand Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.
  • Page 65 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-8 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group.

  • Page 66: Platform Access

    DS-K1T673 Series Face Recognition Terminal User Manual IP Address Set the ISUP server's IP address. Port No. Set the ISUP server's port No. Note Port No. Range: 0 to 65535. Device ID Set device serial no. Password If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only.

  • Page 67: Add Administrator

    DS-K1T673 Series Face Recognition Terminal User Manual 7.3.1 Add Administrator The administrator can log in the device backend and configure the device parameters. Steps 1. Long tap on the initial page and log in the backend. 2. Tap User → + to enter the Add User page.

  • Page 68: Add Face Picture

    DS-K1T673 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. Up to 32 characters are allowed in the user name. ● 5. Optional: Add a face picture, fingerprints, cards, or Pin for the administrator.
  • Page 69 DS-K1T673 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Face Picture field to enter the face picture adding page.

  • Page 70: Add Fingerprint

    DS-K1T673 Series Face Recognition Terminal User Manual Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. ● For details about the instructions of adding face pictures, see Tips When Collecting/ ●...

  • Page 71: Add Card

    DS-K1T673 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Fingerprint field to enter the Add Fingerprint page.

  • Page 72: View Pin Code

    DS-K1T673 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 6. Tap the Card field and tap +.

  • Page 73: Set Authentication Mode

    DS-K1T673 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the PIN code to view the PIN code.

  • Page 74: Data Management

    DS-K1T673 Series Face Recognition Terminal User Manual Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the user name for search.

  • Page 75: Export Data

    DS-K1T673 Series Face Recognition Terminal User Manual The imported pictures should be saved in the folder (named enroll_pic) of the root directory ● and the picture's name should be follow the rule below: Card No._Name_Department_Employee ID_Gender.jpg If the folder enroll_pic cannot save all imported pictures, you can create another folders, ●...

  • Page 76: Authenticate Via Multiple Credential

    DS-K1T673 Series Face Recognition Terminal User Manual Face forward at the camera and start authentication via face. Fingerprint Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint. Card Present the card on the card presenting area and start authentication via card.

  • Page 77: Basic Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 7.6 Basic Settings You can set the shortcut key, theme, voice settings, time settings, sleeping (s), community No., building No., Unit No., and beauty. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the device home page.
  • Page 78 DS-K1T673 Series Face Recognition Terminal User Manual Note Only devices connected to the QR code module support QR code function. ● You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP. ● Call Room When you tap the call button on the authentication page, you should dial a room No.

  • Page 79: Set Biometric Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Set the device installed building No. Unit No. Set the device installed unit No. Beauty You can enable the beauty function and set the smooth and the whiten parameter. Tap + or - to control the effect strength.
  • Page 80 DS-K1T673 Series Face Recognition Terminal User Manual Parameter Description Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.

  • Page 81: Set Access Control Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual 7.8 Set Access Control Parameters You can set the access control permissions, including the functions of authentication mode, enable NFC card, enable M1 card, door contact, open duration (s) and authentication interval (s).

  • Page 82: Time And Attendance Status Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Parameter Description Note Only the device with the fingerprint module supports the ● fingerprint related function. Biometric recognition products are not 100% applicable to ● anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

  • Page 83: Set Manual Attendance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Tap T&A Status to enter the T&A Status page. Figure 7-13 Disable Attendance Mode Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform.

  • Page 84: Set Auto Attendance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-14 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.
  • Page 85 DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Auto. Figure 7-15 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status.

  • Page 86: Set Manual And Auto Attendance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.9.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule.

  • Page 87: System Maintenance

    DS-K1T673 Series Face Recognition Terminal User Manual 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK.
  • Page 88 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-17 Maintenance Page System Information You can view the device model, serial No., versions, address, production data, QR code, and open source code license. Note The page may vary according to different device models. Refers to the actual page for details.

  • Page 89: Video Intercom

    DS-K1T673 Series Face Recognition Terminal User Manual Plug the USB flash drive in the device USB interface. Tap Upgrade, and the device will read the digicap.dav file in the USB flash drive to start upgrading. Unlink APP Account After unlinking APP account, you cannot operate via APP.

  • Page 90: Call Center From Device

    DS-K1T673 Series Face Recognition Terminal User Manual 7.11.2 Call Center from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up.

  • Page 91: Call Room From Device

    DS-K1T673 Series Face Recognition Terminal User Manual 7. Click Start Two-Way Audio to start two-way audio between the device and the client software. 7.11.4 Call Room from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts.

  • Page 92: Chapter 8 Operation Via Web Browser

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .
  • Page 93 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-1 Live View Page Function Descriptions: Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds.

  • Page 94: Person Management

    DS-K1T673 Series Face Recognition Terminal User Manual Select the streaming type when starting live view. You can select from the main stream and the sub stream. Select the window division type when starting live view. Full screen view. 8.3 Person Management...

  • Page 95: Configuration

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-2 Search Event Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel.

  • Page 96: View Device Information

    DS-K1T673 Series Face Recognition Terminal User Manual You can also click Open to open the file folder to view details. 8.5.2 View Device Information View the device name, language, model, serial No., QR code, version, number of channels, alarm input, alarm output, lock and RS-485, device capacity, etc.

  • Page 97: Set Dst

    DS-K1T673 Series Face Recognition Terminal User Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. 8.5.4 Set DST Steps 1.
  • Page 98 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-5 Upgrade and Maintenance Page Click Reboot to start reboot the device. Restore Parameters Click Configuration → System → Maintenance → Upgrade & Maintenance . Restore All All parameters will be restored to the factory settings. You should activate the device before usage.

  • Page 99: Log Query

    DS-K1T673 Series Face Recognition Terminal User Manual Upgrade Click Configuration → System → Maintenance → Upgrade & Maintenance . Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC. Click Upgrade to start upgrading.

  • Page 100: Certificate Management

    DS-K1T673 Series Face Recognition Terminal User Manual 8.5.9 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Configuration → System → Security → Certificate Management .

  • Page 101: Change Administrator's Password

    DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Create an ID in the Inport CA Certificate area. Note The input certificate ID cannot be the same as the existing ones.
  • Page 102 DS-K1T673 Series Face Recognition Terminal User Manual Note Some device models do not support Wi-Fi settings. Refer to the actual products when configuration. Set Basic Network Parameters Click Configuration → Network → Basic Settings → TCP/IP . Set the parameters and click Save to save the settings.
  • Page 103 DS-K1T673 Series Face Recognition Terminal User Manual Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Click Configuration → Network → Basic Settings → Wi-Fi . Figure 8-6 Wi-Fi Settings Page 2.
  • Page 104 DS-K1T673 Series Face Recognition Terminal User Manual You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save the settings. Center Group Select a center group from the drop-down list. Main Channel The device will communicate with the center via the main channel.

  • Page 105: Set Video And Audio Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual 3. Optional: Click Test to test whether the entered IP address or host name are valid. 4. Optional: Click Default to reset the destination IP or host name. 5. Click Save. 8.5.13 Set Video and Audio Parameters Set the image quality, resolution, and the device volume.

  • Page 106: Customize Audio Content

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-8 Set Audio Parameters Drag the block to adjust the device input and output volume. Click Save to save the settings after the configuration. You can also enable Voice Prompt. Note The functions vary according to different models. Refers to the actual device for details.
  • Page 107 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-9 Customize Audio Content 2. Set the appellation. 3. Enable the function. 4. Set the time duration when authentication succeeded. 1) Click Add. 2) Set the time duration and the language. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content.

  • Page 108: Set Image Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration. 6. Optional: Import custom prompt. 1) Select Custom Type. 2) Select the importing path, and click Import.

  • Page 109: Set Supplement Light Brightness

    DS-K1T673 Series Face Recognition Terminal User Manual 8.5.16 Set Supplement Light Brightness Set the device supplement light brightness. Steps 1. Click Configuration → Image → Supplement Light Parameters . 2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON, you should set the brightness.
  • Page 110 DS-K1T673 Series Face Recognition Terminal User Manual Time Settings Steps 1. Click Configuration → Time Settings to enter the settings page. 2. Select Status Type. 3. Optional: Edit Schedule Name according to the actual needs. 4. Drag mouse to set the schedule.
  • Page 111 DS-K1T673 Series Face Recognition Terminal User Manual Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration → Attendance to enter the settings page. 2. Set the Attendance Mode as Auto.

  • Page 112: General Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 8.5.19 General Settings Set Authentication Parameters Click Configuration → General → Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration.
  • Page 113 DS-K1T673 Series Face Recognition Terminal User Manual Enable to report alarm when the card reading attempts reach the set value. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Enable Card No. Reversing The read card No. will be in reverse sequence after enabling the function.
  • Page 114 DS-K1T673 Series Face Recognition Terminal User Manual Enable the anti-tamper detection for the card reader. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to Configuration → General → Privacy .
  • Page 115 DS-K1T673 Series Face Recognition Terminal User Manual If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted.

  • Page 116: Video Intercom Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. Enable DESFire Card The device can read the data from DESFire card when enabling the DESFire card function.
  • Page 117 DS-K1T673 Series Face Recognition Terminal User Manual Note If you change the device type, you should reboot the device. Floor No. Set the device installed floor No. Door Station No. Set the device installed floor No. Note If you change the No., you should reboot the device.

  • Page 118: Access Control Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Note Only the access control device and other devices or systems (such as door station, indoor station, main station, platform) are in the same IP segment, the two-way audio can be performed. Go to Configuration → Video Intercom → Linked Network Settings .
  • Page 119 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-10 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration.
  • Page 120 DS-K1T673 Series Face Recognition Terminal User Manual You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. Extended Open Duration The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card.
  • Page 121 DS-K1T673 Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.

  • Page 122: Set Biometric Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically. 8.5.22 Set Biometric Parameters Set Basic Parameters Click Configuration → Smart → Smart .
  • Page 123 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-12 Set Face Parameters Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration. Face Anti-spoofing...
  • Page 124 DS-K1T673 Series Face Recognition Terminal User Manual Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

  • Page 125: Set Notice Publication

    DS-K1T673 Series Face Recognition Terminal User Manual Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face Recognition Timeout Value Set the timeout value when face recognizing. If the face recognition time is longer than the configured value, the system will pop up a prompt.
  • Page 126 DS-K1T673 Series Face Recognition Terminal User Manual Click Configuration → Theme . Display Mode You can select display theme for device authentication. You can select Display Mode as Simple, Advertisement Mode or Normal. When you select Simple, the information of name, ID, face picture will be not displayed.

  • Page 127: Chapter 9 Client Software Configuration

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 9 Client Software Configuration 9.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 9-1 Flow Diagram of Configuration on Client Software 9.2 Device Management...

  • Page 128: Add Device

    DS-K1T673 Series Face Recognition Terminal User Manual Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 9.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol.
  • Page 129 DS-K1T673 Series Face Recognition Terminal User Manual you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

  • Page 130: Reset Device Password

    DS-K1T673 Series Face Recognition Terminal User Manual Address Edit the address of the device. Port Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin.

  • Page 131: Manage Added Devices

    DS-K1T673 Series Face Recognition Terminal User Manual Note For the following operations for resetting the password, contact our technical support. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 132: Group Management

    DS-K1T673 Series Face Recognition Terminal User Manual 9.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management.

  • Page 133: Person Management

    DS-K1T673 Series Face Recognition Terminal User Manual Note You can click to switch the resource display mode to thumbnail view or to list view. 6. Click Import to import the selected resources to the group. 9.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc.
  • Page 134 DS-K1T673 Series Face Recognition Terminal User Manual Import Person Information You can enter the information of multiple persons in a predefined template (CSV/Excel file) to import the information to the client in a batch. Steps 1. Enter the Person module.
  • Page 135 DS-K1T673 Series Face Recognition Terminal User Manual Note The (folder of) face pictures should be in ZIP format. ● Each picture file should be in JPG format and should be no larger than 200 KB. ● Each picture file should be named as "Person ID_Name". The Person ID should be the same ●...

  • Page 136: Get Person Information From Access Control Device

    DS-K1T673 Series Face Recognition Terminal User Manual Note The exported file is in ZIP format. ● The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face). ● 9.4.3 Get Person Information from Access Control Device...

  • Page 137: Report Card Loss

    DS-K1T673 Series Face Recognition Terminal User Manual 3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need issuing cards. 4. Optional: Click Settings to set the card issuing parameters. For details, refer to Issue a Card by Local Mode.

  • Page 138: Configure Schedule And Template

    DS-K1T673 Series Face Recognition Terminal User Manual Local Mode: Issue Card by Card Enrollment Station Connect a card enrollment station to the PC running the client. You can place the card on the card enrollment station to get the card number.

  • Page 139: Add Holiday

    DS-K1T673 Series Face Recognition Terminal User Manual 9.5.1 Add Holiday You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day. Steps Note You can add up to 64 holidays in the software system.
  • Page 140 DS-K1T673 Series Face Recognition Terminal User Manual Steps Note You can add up to 255 templates in the software system. 1. Click Access Control → Schedule → Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted.

  • Page 141: Set Access Group To Assign Access Authorization To Persons

    DS-K1T673 Series Face Recognition Terminal User Manual 4) Optional: Select a selected holiday in the right list and click to remove the selected one, or click Clear to clear all the selected holiday(s) in the right list. 7. Click Save to save the settings and finish adding the template.
  • Page 142 DS-K1T673 Series Face Recognition Terminal User Manual Figure 9-2 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device.

  • Page 143: Configure Advanced Functions

    DS-K1T673 Series Face Recognition Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later.
  • Page 144 DS-K1T673 Series Face Recognition Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Before You Start Add access control device to the client.
  • Page 145 DS-K1T673 Series Face Recognition Terminal User Manual Press Key to Enter Card Number If you enable this function, you can input the card No. by pressing the key. Wi-Fi Probe If you enable this function, the device can probe the surrounding communication devices' MAC address and upload the MAC address to the system.
  • Page 146 DS-K1T673 Series Face Recognition Terminal User Manual You can set the exit button as remaining closed or remaining open. Usually, it is remaining open. Door Locked Time After swiping the normal card and relay action, the timer for locking the door starts working.
  • Page 147 DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Click Access Control → Advanced Function → Device Parameter . 2. In the device list on the left, click to expand the door, select a card reader and you can edit the card reader's parameters on the right.
  • Page 148 DS-K1T673 Series Face Recognition Terminal User Manual Select the fingerprint recognition level in the drop-down list. Default Card Reader Authentication Mode View the default card reader authentication mode. Fingerprint Capacity View the maximum number of available fingerprints. Existing Fingerprint Number View the number of existed fingerprints in the device.
  • Page 149 DS-K1T673 Series Face Recognition Terminal User Manual user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Application Mode You can select indoor or others application modes according to actual environment.

  • Page 150: Configure Device Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Passing Mode Select the controller which will control the barrier status of the device. If you select According to Lane Controller's DIP Settings, the device will follow the lane ● controller's DIP settings to control the barrier. The settings on the software will be invalid.
  • Page 151 DS-K1T673 Series Face Recognition Terminal User Manual 2. On the navigation bar on the left, enter Advanced Function → More Parameters . 3. Select an access control device in the device list and click Face Recognition Terminal. 4. Set the parameters.
  • Page 152 DS-K1T673 Series Face Recognition Terminal User Manual 5. Set the baud rate, data bit, the stop bit, parity type, communication mode, working mode, and connection mode in the drop-down list. Note When the connection mode is Connect Access Control Device, you can select Card No. or Person ID as the output type.

  • Page 153: Door/Elevator Control

    DS-K1T673 Series Face Recognition Terminal User Manual 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function → More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption to enter the M1 Card Encryption page.

  • Page 154: Check Real-Time Access Records

    DS-K1T673 Series Face Recognition Terminal User Manual Note For Remain All Unlocked and Remain All Locked, ignore this step. 4. Click the following buttons to control the door. Unlock When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically.
  • Page 155 DS-K1T673 Series Face Recognition Terminal User Manual Before You Start You have added person(s) and access control device(s) to the client. For details, refer to Person Management and Add Device . Steps 1. Click Monitoring to enter monitoring module. Real-time access records are displayed on the bottom of the page. You can view record details, including card No., person name, event time, door location, temperature, authentication type...
  • Page 156 DS-K1T673 Series Face Recognition Terminal User Manual 7. Optional: Click to view details (including person's detailed information and the captured picture). Note In the pop-up window, you can click to view details in full screen.

  • Page 157: Appendix A. Tips For Scanning Fingerprint

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 158 DS-K1T673 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 159: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.3 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 160 DS-K1T673 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 161: Appendix C. Tips For Installation Environment

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 162: Appendix D. Dimension

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix D. Dimension...

  • Page 163: Appendix E. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command...
  • Page 164 UD24660B-C...

This manual is also suitable for:

Ds-k1t673 seriesDs-k1t673dxDs-k1t673dwxDs-k1t673tdxDs-k1t673tdwxDs-k1t673tdgx ... Show all

Table of Contents