Panasonic RP-BT10-W Operating Instructions Manual page 20

Talking on your cellphone
Talking on the phone
■
Receiving incoming calls
You will hear the incoming call tone when someone calls
the number of your cellphone.
- To talk to the other party, Press the MIC button on the
receiver.
- To switch the call to your cellphone, Press and hold the
MIC button on the receiver for 2 seconds after the
call has been connected.
- To refuse the call, Press and hold the MIC button on the receiver for 2 seconds during the call tone.
■
Hanging up
Press the MIC button on the receiver. The call is now terminated.
Notes:
• If you receive a call while music is playing on the iPod
and you will hear the incoming call tone.
• When the call is terminated, the iPod
Adjusting the call volume
The call volume can be adjusted by pressing the [+] and [–] buttons.
Notes:
• The call volume cannot be adjusted during call standby.
• You can select separate settings for the call volume level and music play level.
Winding up an operation session
Disconnect the Bluetooth connection using your cellphone.
Note:
• For further details on disconnecting the Bluetooth connection, refer to the operating
instructions of your cellphone.
20
Press and hold the MIC button on the receiver for 6 seconds.
The receiver's power is turned off, and its lamp (red) goes off.
® , the iPod
® music will resume.
® music will be temporarily suspended,
MIC