Hitachi NW-60CS User Manual page 12

Installation Guide (continued)
安裝指南（續）
The base plate is placed on the packaging foam
on the top of the washer.
1
Lay the unit down slowly.
Lay the unit down on some corrugate paper to prevent
damage.
2
Align the hook on the base plate with
the square hole on the chassis and insert
it, then tighten the screw.
Connecting the water supply hose to the main unit
供水管與機體的連接
Firmly tighten the union nut
when connecting the water
supply hose to the main unit.
沿箭咀方向旋轉連接螺母，使其與
供水口緊緊相連。
•
Loosely tightened union nut will cause water leakage.
請務必擰緊供水管與機體的連接螺母。否則，將會漏
水。
•
When removing the hose, unscrew the union nut fi rst.
拆卸供水管時，先鬆開連接螺母，再進行拆卸。
12
installation of the bottom plate
底板的安裝
How to Install the Water Supply Hose
供水管的安裝
(Suitable in NW-60CS)
NW-60CS
Back
Corrugate paper etc.
Screw
(Suitable in NW-60CSP)
NW-60CSP
Back
Screw
Extended the water supply hose
供水管的延長
Please use optional extension tube for
lengthening the water supply hose.
請使用另行銷售的延長供水管。
Three standard of extension hoses (3m) are
available.Please inquire distributors for extending
the water supply hose.
備有 3m 規格供購買。
如欲駁長供水管，請向銷售商查詢。
The water
drainage hose
Front
Front
Corrugate paper etc.