Table of Contents
Advertisement
Scan the following bar code, then use the
alphanumeric combination that represents that ASCII character. Scan
Save
to finish.
Reread Delay
This sets the time period before the engine can read the same bar code a
sec-ond time. Setting a reread delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads.
Use shorter delays in applications where repetitive bar code scanning is
required. Default = Medium.
Short (500 ms)
Long (1000 ms)
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the following
bar code, then set the delay (from 0-30,000 milliseconds) by scanning digits
from the
Programming
3-12
Deactivation Character
Chart, then scanning Save.
User-Specified Reread Delay
Programming Chart
* Medium (750 ms)
Extra Long (2000 ms)
to read the
Advertisement
Table of Contents
