Canon LV-7565F Owner's Manual page 38

SETTING
Anamorphic
When this function is "On," the screen image is forcibly changed to a
4:3 image, even if the input signal is HDTV.
Blue back
When this function is "On," this projector will produce a blue image
instead of the video noise on the screen when any input source is
unplugged or turned off.
Display
This function decides whether to display On-Screen Displays.
On ··· shows all the On-Screen Displays.
Off ···· sets On-Screen Displays disappeared except;
G ON-SCREEN MENU
G "Power off?" message
G P-TIMER
G "No signal" message
G "Wait a moment" message
Menu position
This function is used to adjust the on-screen menu display position.
When a SET button is pressed, the adjustment screen is displayed
(arrows appear). Use the POINT UP/DOWN/LEFT/RIGHT button(s)
to adjust the position. After making the adjustment, press a SET
button to return to the Menu screen.
Logo
When this function is "On," projector displays logo when starting up.
Ceiling
When this function is "On," picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Ceiling function
Rear
When this function is "On," picture is left / right reversed. This
function is used to project the image to a rear projection screen.
Rear function
38
Press SET button at this icon to
display other items.
Press SET button at this icon to
display previous items.