Connecting To Video Equipment - Canon LV-7565F Owner's Manual

CONNECTING PROJECTOR
Cables used for connection
• Video Cable (RCA x 1 or RCA x 3)
✽
• BNC Cable
• S-VIDEO Cable ✽
• Audio Cable (RCA x 2)
Video Source (example)
Video Cassette Recorder
RGB Scart
21-pin Output Video Output
Scart Cable ✽
RGB ANALOG IN/OUT
AUDIO OUT
Audio Cable
(stereo) ✽
Audio Input
External Audio Equipment
Audio Amplifier
14

CONNECTING TO VIDEO EQUIPMENT

( ✽ = Cable is not supplied with this projector.)
✽
✽
Composite
Component Video
Output
(Y, Cb/Pb, Cr/Pr)
Video Cables
RCA x 1 or
(
RCA x 3
) ✽
VIDEO
Y - Cb/Pb - Cr/Pr
NOTE;
This terminal is switchable.
Set the terminal up as either
Computer audio input 1 or audio
monitor output (variable) before
using this terminal.
(See page 23.)
Audio Speaker
(stereo)
• Audio Cable {Mini Plug (stereo)}
✽
• Scart Cable
Component video output equipment.
(such as DVD player or high-definition TV source.)
Video Disc Player
Component Video
Composite
Video Output Output
(Y, Cb/Pb, Cr/Pr)
BNC Cable ✽
VIDEO
Y - Cb/Pb - Cr/Pr
INPUT 1
RGB DIGITAL
RGB ANALOG IN/OUT
CONTROL PORT
AUDIO 1 RESET
AUDIO 2
IN/OUT
G B R H/V
VIDEO/Y Cb/Pb Cr/Pr
INPUT 2
VIDEO/Y Cb/Pb Cr/Pr R–AUDIO–L
(MONO)
INPUT 3
Terminals
of a Projector
NOTE :
When connecting cable, power cords of
both a projector and external equipment
should be disconnected from AC outlet.
✽
Audio Output S-VIDEO
Output
Audio Cable
S-VIDEO
(RCA x 2) ✽ Cable
AUDIO IN
S-VIDEO
R/C JACK
V
S–VIDEO
✽