Makita MP001G Instruction Manual page 9

light up for a few seconds.
Indicator lamps
NOTE: Depending on the conditions of use and the
from the actual capacity.
NOTE:
Then turn the tool on to restart.
is displayed on the pressure gauge. In this situation,
Then, turn the tool on again.
WARNING:
-
CAUTION:
To turn on the tool, press the main power switch. To turn
NOTE:
To avoid unintentional start up, the main power switch
will automatically shut down when the switch trigger
is not pulled for a certain period after the main power
switch is turned on.
WARNING:
Charge the
may have
malfunctioned.
WARNING:
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
1
2
-
3
4
5
6
8
9
pressure gauge when you turn on the tool. If nothing is
connected to the tool, the pressure gauge displays "0".
The pressure gauge also displays the target pressure
-
the same as the last time.
progress indicator comes to the right end.
9 ENGLISH
Otherwise, pulling the switch
Main power switch
Switch trigger
Overheat warning icon
Current pressure value
Target pressure value
Pressure value unit
-