Table of Contents
Advertisement
3 Get started
Always follow the instructions in this chapter in
sequence.
Prepare the remote control
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the empty battery:
1
Open the battery tray.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery tray.
CR2025
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the AC adaptor, ensure you have
completed all other connections.
Note
•
The type plate is located at the back of the main unit.
Connect the AC power adaptor to:
• the power supply socket on the back
of the docking speaker.
• the wall outlet.
Turn on
Press and hold on the main unit for 2 seconds.
» The
/
Switch to standby mode
In the following situation, the docking speaker
switches to standby mode automatically:
• In DOCK mode: the iPod/iPhone/iPad
is disconnected or music is not played
for 15 minutes.
• In MP3 Link mode: no MP3 link cable is
connected for 15 minutes.
• In Bluetooth mode: the Bluetooth
device does not play music for 15
minutes.
» The LED indicators turns off.
Note
•
In standby mode, if you press on the main unit or
on the remote control, the docking speaker switches
to the corresponding selected source.
LED indicators light up.
EN
/
7
Advertisement
Table of Contents
