Get Started; Prepare The Remote Control - Philips DC350V37 User Manual

BLUETOOTH
q
•

3 Get started

Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this
apparatus. The model number and serial number are on the bottom of the apparatus.
Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3
Close the battery compartment.
14 EN
DC350_37.indd DC350_37.indd 14 14
Select Bluetooth source.
12/31/2008 12/31/2008 3:43:52 PM 3:43:52 PM