Operation
EMU42702
Procedure for tilting down
1.
Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
1
1. Power trim and tilt switch
70
"
1
1. Power trim and tilt switch
DN
"
1. Power trim and tilt switch
EMU28063
EMU40702
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM02361
NOTICE
ZMU07851
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
DN
1
Shallow water
ZMU07853
ZMU07771