Page 1
Page 1 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 All manuals and user guides at all-guides.com INSTRUCTION MANUAL UNIMIG 345SWF MIG Welder (415V) 40-335A W191...
Page 2
“cleaned”.Vent hollow castings or containers before heating, cutting or welding. They may explode. UNIMIG pursue a policy of continuous research and development, and therefore reserve the right to change the specifications, or design, without prior notice.
Page 3
All manuals and user guides at all-guides.com Page 3 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014...
Page 4
All manuals and user guides at all-guides.com Page 4 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 SAFETY...
Page 5
All manuals and user guides at all-guides.com Page 5 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 SAFETY...
Page 6
All manuals and user guides at all-guides.com Page 6 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦...
Page 7
All manuals and user guides at all-guides.com Page 7 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 ♦ ♦ ♦ ♦...
Page 8
All manuals and user guides at all-guides.com Page 8 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 All electrical repair’s must be carried out by a Licensed Technician, The machine must be disconnected from the electrical supply before any repairs are made to the machine.
Page 9
All manuals and user guides at all-guides.com Page 9 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ → → → → → → All electrical repair’s must be carried out by a Licensed Technician, The machine must be disconnected from the electrical supply before any repairs are made to the machine.
Page 10
All manuals and user guides at all-guides.com Page 10 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014...
Page 11
All manuals and user guides at all-guides.com Page 11 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014...
Page 12
All manuals and user guides at all-guides.com Page 12 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 Welding Tips ∅ ∅ ♦ ♦ ♦ ∅ ∅ ♦ ♦ ∅ ♦...
Page 13
All manuals and user guides at all-guides.com Page 13 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 Welding Tips...
Page 14
All manuals and user guides at all-guides.com Page 14 Instruction Manual for UNIMIG 345SWF (W191) 16/12/2014 MAINTENANCE WARNING: Exposure to extremely dusty, damp, or corrosive air is damaging to the welding machine. In order to prevent any possible failure or fault of this welding equipment, clean the dust at regular intervals with clean and dry compressed air of required pressure.