Connections; Connecting The Tv To A Sbb Or Stb; Connecting The Tv To The Game Controller - Samsung HG43NJ678U Install Manual

06 Connections

Connecting the TV to a SBB or STB

STB (SBB)
ETH MODEM
Connect the DATA port of the TV to the ETH MODEM port of the STB (SBB) with the Data cable.
• The ETH MODEM port name that you connect the Data Cable to may differ depending on the SBB or STB type.
• The remote control IR signal need to meet the following specification to use IR pass through function.
IR signal reciever specification
– Band pass filter center frequency: 37.9 ㎑
– Carrier Frequency, Duty 50%
– Minimum Burst Length (tburst): 12 pulses (316 us)
– Minimum Gap Time Between the burst (tburst gap): 16 pulses (422 us)
– Minimum Gap Time between the data commands (tpause): 25 ㎳

Connecting the TV to the game controller

Game Controller
Connect the LodgeNet game controller to the DATA port of the TV.
Data Cable
Data Cable
English - 19
TV Rear Panel
TV Rear Panel