Advertisement
Quick Links
Manual
Manuale / Manuel / Betriebsanleitung / Manual / Navodila / Priručnik / Uputstvo / Használati utasítás / Instrukcja
ZNO2060400 A
FlexiTech Exit Wall 20M/30M AT L'
L
x 1
x 1
1
a
0 V
c
Drill in the honeycomb zones (IP43) or
in the 4 flexible material parts (IP66).
!
For honeycombs, be careful to battery location.
For corner fixing, use 4 screws.
04/2021
20M
L
231mm
H
125mm
W
34mm
W
20M: x 2
x 1
x 1
30M: x4
b
In order to ensure proper aging of the product, use one of the framed cable entries.
1
D
Maintained
30M
326mm
178mm
LiFePO
38mm
PZ0
2,5 mm
Break a cable entry by
using a screwdriver.
C
Non Maintained
A
+ 45°C
+ 45°C
+ 5°C
0°C
Before use
x2
Ø 5 mm
Rigid or flexible wire
6 mm < Ø < 13,5 mm
2
B
24h
Advertisement
Related Manuals for Eaton FlexiTech Exit Wall 20M AT L'
Summary of Contents for Eaton FlexiTech Exit Wall 20M AT L'
- Page 1 Manual Manuale / Manuel / Betriebsanleitung / Manual / Navodila / Priručnik / Uputstvo / Használati utasítás / Instrukcja ZNO2060400 A 04/2021 FlexiTech Exit Wall 20M/30M AT L’ Maintained Non Maintained + 45°C + 45°C + 5°C 0°C 231mm 326mm 125mm 178mm LiFePO...
- Page 2 230V ac / IP66 IK07 SÉCU RITÉ COOP ER Li 3.2V 1.5A 63204 RIOM Made in Roman Data installazione Even Duration Test Day D Duration Test Day postponed by 7 days FLEXITECH EXIT WALL AT L’ ZNO2060400 A 04/2021 www.eaton.com...
-
Page 3: Led Description
Constant Blinking Disconnect the battery, wait for 10 seconds, and reconnect it if you decide to change Even/Odd configuration. PICTOGRAM CONFIGURATION CLICK CLICK CLICK CLICK CLICK CLICK CLICK x6 230 V FLEXITECH EXIT WALL AT L’ ZNO2060400 A 04/2021 www.eaton.com... -
Page 4: Magnet Test
Duration test 10-20 s Green Reset luminaire Hold the magnet against the product Green/ < 1s to select light level DIM level Yellow (in Mains mode). Lmax = 50cd/m² or 500cd/m² FLEXITECH EXIT WALL AT L’ ZNO2060400 A 04/2021 www.eaton.com... - Page 5 WEEE : Contacter votre revendeur local Eaton Eaton.com/recycling EMEA Headquarters Route de la Longeraie 7 ZNO2060400 A- 04/2021 1110 Morges, Switzerland Eaton.eu Eaton is a registered trademark. 100 % © 2021 Eaton All trademarks are property All Rights Reserved of their respective owners.
- Page 6 Non maintained Use screwdriver to Drill in the honeycomb Maintained Maintained Break a cable entry by place and remove zones or in the flexible Check the tempera- Before using a screwdriver. material. wire. ture range on the 1st For corner fixing, use maintained Rigid or flexible wire No screwdriver requi-...
- Page 7 Disconnect the battery, wait for Even/ Odd Autotest LED Description 10 seconds, and reconnect it if - Duration Test Day D - Charge / Lamp / Battery - Green / Yellow Installation date - Duration Test Day Battery you decide to change - Constant / Blinking postponed by 7 days - 1wk / 10wks...
- Page 8 Magnet Test Functional Test Disconnect the battery, wait for 10 seconds, and reconnect it Duration Test Pictogram configuration Reset luminaire if you decide to change Even/Odd configuration. DIM level Green / Yellow Test magnet Test fonctionnel Débrancher la batterie, attendre 10 secondes, et rebrancher si vous Configuration Test de durée décidez de changer la configuration Pair/Impair.
- Page 9 Replaceable Not replaceable Hold the magnet against the product Battery pack, Order code to select light level (in Mains mode). If the battery duration is insufficient, replace the battery. When the life time of light source is over, replace the luminaire. Remplacable Maintenir le magnet contre le produit Non remplaçable...