Cisco SPA2102 Reconfiguration Manual page 2

Cisco SPA2102 and 8000 ATA
Manual Reconfiguration Guide
10. Select "Submit All Changes" at the bottom of the page
11. When the GUI returns, cycle power on the SPA. Wait 5 minutes for the new configuration
to download.
Once the second boot process has completed, the device will be provisioned for use in the
BroadSoft BroadCloud PBX network. If the station assignment process was properly
completed prior to the reboot, the device will boot into a station specific assigned/usable
state. If not, the device will boot into a default unassigned/unusable state, and will remain in
this state until the site administrator has completed the station assignment process. If this
occurs, contact your site administrator and request that station assignment be completed for
the device in question.