Panasonic SA-PT70EB Service Manual page 64

Step 3 Slightly move DVD Mechanism Unit (DLS6E) forward
according to diagram shown.
Caution: Insulated material is required to insulate DVD
Mechanism Unit (DLS6E) from other parts.
Step 4 Connect 17P FFC at the connector (CN4001) on Scart
P.C.B..
Caution: Insulated material is required to insulate Scart
P.C.B. from other parts.
Step 5 Proceed to check and repair Side B of DVD Module
P.C.B..
10.4.2. Checking & Repairing of Side A of
DVD Module P.C.B.
• Follow (Step 1) to (Step 7) of Item 10.4.1.
Step 1 Remove 2 screws.
Step 2 Remove 1 screw.
Step 3 Remove 1 screw.
Step 4 Release the tab of the side of the Rear Panel in the
direction of arrow.
64