Disassembly Of Smps P.c.b - Panasonic SA-PT70EB Service Manual

Caution: During assembling, ensure that DVD Module
P.C.B. is properly located & fully seated onto bottom chas-
sis.
8.8.

Disassembly of SMPS P.C.B.

• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 3) of Item 8.5.
Step 1 Position Rear Panel according to diagram shown.
Step 2 Detach 15P cable at the connector (CN103) on Main/D-
Amp P.C.B..
Step 3 Remove 4 screws.
Step 4 Lift up to remove SMPS P.C.B..
Caution: To avoid shocked by electricity, handle SMPS
P.C.B. carefully. DO NOT TOUCH electrical components
and heatsinks when removing SMPS P.C.B..
48