Advertisement

Quick Links

Network Video Recorder
Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for HIKVISION HiLook NVR-104H-D

  • Page 1 Network Video Recorder Quick Start Guide...
  • Page 2: Table Of Contents

    Network Video Recorder Quick Start Guide TABLE OF CONTENTS Chapter1 Panels Description .......................... 7 1.1 Front Panel ............................7 1.2 Rear Panel ............................8 NVR-100H-D and NVR-100MH-D Series ..................8 NVR-100H-D/P and NVR-100MH-D/P Series .................. 9 Chapter 2 Installation and Connections ...................... 10 2.1 NVR Installation ..........................
  • Page 3 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
  • Page 4 Network Video Recorder Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Network Video Recorder Quick Start Guide Applicable Models This manual is applicable to the models listed in the following table. Series Model NVR-104H-D NVR-100H-D NVR-108H-D NVR-104H-D/4P NVR-100H-D/P NVR-108H-D/8P NVR-104MH-D NVR-100MH-D NVR-108MH-D NVR-104MH-D/4P NVR-100MH-D/P NVR-108MH-D/8P Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement...
  • Page 6 Network Video Recorder Quick Start Guide Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 7 Network Video Recorder Quick Start Guide Power Supply Instructions Use only power supplies listed in the user instructions. NVR Models Standard Power Supply Models Manufacturer MSA-C1500IC12.0-18P-DE MOSO Power Supply Technology Co., Ltd ADS-26FSG-12 12018EPG Shenzhen HONOR Electronic Co., Ltd European NVR-104H-D KL-AD3060VA Xiamen Keli Electronics Co., Ltd...
  • Page 8: Chapter1 Panels Description

    Network Video Recorder Quick Start Guide Chapter1 Panels Description 1.1 Front Panel Figure 1-1 NVR-100H-D (/P) Series Figure 1-2 NVR-100MH-D (/P) Series Table 1-1 Description of Front Panel No. Icon Description Indicator turns red when NVR is powered up. Indicator lights in red when data is being read from or written to HDD.
  • Page 9: Rear Panel

    Network Video Recorder Quick Start Guide 1.2 Rear Panel NVR-100H-D and NVR-100MH-D Series Figure 1-3 NVR-100H-D Rear Panel Figure 1-4 NVR-100MH-D Rear Panel Table 1-2 Description of Rear Panel Item Description Power Supply 12 VDC power supply. DB9 connector for VGA output. Display local video VGA Interface output and menu.
  • Page 10: Nvr-100H-D/P And Nvr-100Mh-D/P Series

    Network Video Recorder Quick Start Guide NVR-100H-D/P and NVR-100MH-D/P Series Figure 1-5 NVR-100H-D/P Rear Panel Figure 1-6 NVR-100MH-D/P Rear Panel Table 1-3 Description of Rear Panel Item Description Power Supply 12 VDC power supply. VGA Interface DB9 connector for VGA output. Display local video output and menu.
  • Page 11: Chapter 2 Installation And Connections

    Network Video Recorder Quick Start Guide Chapter 2 Installation and Connections 2.1 NVR Installation During installation of the NVR:  Use brackets for rack mounting.  Ensure ample room for audio and video cables.  When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
  • Page 12 Network Video Recorder Quick Start Guide Figure 2-2 Fix the HDD Step 3 Connect one end of the data cable to the motherboard of NVR and the other end to the HDD. Step 4 Connect the power cable to the HDD. Figure 2-3 Connect Cables Step 5 Re-install the cover of the NVR and fasten screws.
  • Page 13: Hdd Storage Calculation Chart

    Network Video Recorder Quick Start Guide 2.3 HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K...
  • Page 14: Chapter 3 Menu Operation

    Network Video Recorder Quick Start Guide Chapter 3 Menu Operation 3.1 Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR: Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
  • Page 15 Network Video Recorder Quick Start Guide Figure 3-2 Set Admin Password STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
  • Page 16: Using The Unlock Pattern For Login

    Network Video Recorder Quick Start Guide 3.3 Using the Unlock Pattern for Login For the Admin user, you can configure the unlock pattern for device login. After the device is activated, you can enter the following interface to configure the device unlock pattern.
  • Page 17: Using The Setup Wizard

    Network Video Recorder Quick Start Guide If NVR has logged out, you must login the device before operating the menu and other functions. Step 1 Select the User Name in the dropdown list. Figure 3-6 Login Step 2 Input Password. Step 3 Click OK.
  • Page 18: Adding Ip Cameras

    Network Video Recorder Quick Start Guide Menu > Configuration > Network > General Figure 3-8 Network Settings Step 2 Configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server. Step 3 If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain an IP address and other network settings from that server.
  • Page 19: Live View

    Network Video Recorder Quick Start Guide Figure 3-9 Add IP Camera Step 3 Select the detected IP camera and click Add to add it directly, and you can click Search to refresh the online IP camera manually. Or you can choose to custom add the IP camera by editing the parameters in the corresponding text field and then click Add to add it.
  • Page 20: Playback

    Network Video Recorder Quick Start Guide Purpose: Two kinds of record types are introduced in the following section, including Instant Record and All-day Record. And for other record types, you may refer to the user manual for detailed information. After rebooting all the manual records enabled are canceled. Step 1 On the live view window, right lick the window and move the cursor to the Start Recording option, and select Continuous Record or Motion Detection Record on your demand.
  • Page 21 Network Video Recorder Quick Start Guide Figure 3-11 Playback Interface Step 4 Select the channel(s) to or execute simultaneous playback of multiple channels.
  • Page 22: Chapter 4 Accessing By Web Browser

    Network Video Recorder Quick Start Guide Chapter 4 Accessing by Web Browser You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.
  • Page 23 Network Video Recorder Quick Start Guide  If the device is already activated, enter the user name and password in the login interface, and click Login. Figure 4-2 Login Step 3 Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in.
  • Page 24 Network Video Recorder Quick Start Guide UD09629B-A...

Table of Contents