Unpacking - RIDGID R4850 Operator's Manual

UNPACKING AND CLEANING
This machine weighs about 75 pounds. Use a helper to lift or move it.
Carefully unpack the machine and all loose items from the shipping container. Figure 2 illustrates the planer and all loose items supplied
with your machine. Refer to the section of this manual titled "REPLACING KNIVES" to remove the cutterhead guard. Remove any
rust-preventative oil from unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
DO NOT use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
Take care when you clean the cutterhead. The knives in the cutterhead are very sharp. After cleaning the cutterhead,
replace the cutterhead guard.
PC1
PACKAGE CONTENTS
Planer
PC1
PC2 Dust Collection Attatchment
PC3
Cutterhead Height Adjusting Handle

UNPACKING

Hardware Bag 1:
PC6
PC7
006827 006767
Hardware Bag 2:
PC8 PC6
006846 006767
FIGURE 2
Cutterhead Lock Handle
PC4
T-Handle Torx Wrench
PC5
M6 x 20mm Torx Head Screw (6)
PC6
6.5mm x 16mm x2mmT Flat Washer (4)
PC7
M6 Split Lock Washer (2)
PC8
8
PC2
PC3 PC4 PC5