Jegs ECONOAID 1002 Quick Start Manual

Download this manual

Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-

ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit

or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that

no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.

U.S. Pat. #7,665,442

1. Disconnect the negative battery cable!

Using a 10mm socket, remove three bolts, and the engine

beauty cover. Next remove the air intake tube between the

throttlebody and the air filter housing.

Part Number 1002

1997-03 Ford F-150 5.4L

1997-04 Expedition 5.4L

1999-04 Ford Super Duty 5.4L

1997-06 Ford F-150 4.6L

1997-04 Expedition 4.6L

(Does Not Fit 2004 F-150 Heritage Model)

Tools Required For Installation

2. Remove the four bolts that hold the throttlebody to the in-

take manifold.

5/16", 10mm Sockets

Ratchet and Extension

Parts List

ECONOAID

Gasket

Page 1 Part Number 1002 1997-03 Ford F-150 5.4L 1997-04 Expedition 5.4L 1999-04 Ford Super Duty 5.4L 1997-06 Ford F-150 4.6L 1997-04 Expedition 4.6L (Does Not Fit 2004 F-150 Heritage Model) Tools Required For Installation 5/16”, 10mm Sockets Ratchet and Extension Parts List ECONOAID Gasket Thank you for purchasing the ECONOAID Throttlebody Booster.
Page 2 ECONOAID Rear Gasket Front Gasket 3. Pull the throttlebody away from the intake manifold, install 4. Before starting the engine, open the throttlebody to make the ECONOAID Throttlebody Booster against the intake sure that there are no obstructions. manifold in between the two supplied gaskets with the logo facing the throttlebody.