Wall-Mount Or Attach To Stand; Wall-Mount Your Satellite - NETGEAR RBS50Yv2 User Manual

Table 2. Sync colors
Color LED Behavior
Blue The Orbi router and satellite successfully synced, and the connection between the router and
satellite is good.
Amber The Orbi router and satellite successfully synced, and the connection between the router and
satellite is fair. Consider moving the satellite closer to the router.
Magenta The Orbi router and satellite failed to sync. Move the satellite closer to the router and try again.
Pulsing If the bottom Light LED pulses magenta for about 30 seconds, the satellite's Sync button is
magenta disabled. Log in to the router, enable the Sync button, and repeat the sync process. For more
information, see Enable the Sync button on page 23.

Wall-Mount or Attach to Stand

You can wall-mount your satellite or attach it to the stand that came with your package.

Wall-Mount Your Satellite

To wall-mount your satellite:
1. Use the wall-mount bracket as a template to mark three holes on the wall.
2. Drill holes where you marked on the wall using a 5/32-inch drill bit
3. Place the wall-mount bracket where you drilled the holes and secure the bracket to
the wall using the stucco or concrete screws or the wood screws.
Overview
Orbi Outdoor Satellite
9 User Manual