Setting The Options For Fax/Tel Mode - Canon C75, C80, C70 User Manual

Setting the Options for Fax/Tel Mode

If you set
adjusting the following settings:
• Adjust the time the unit takes to check whether a call is from a fax machine or a telephone
(
• Adjust the length of time the unit rings when the call is a voice call (
setting).
• Set whether the unit switches to receive mode after the ring time set in
has elapsed (
n For MultiPASS models, you can also set these options from the MultiPASS Suite. (
User's Guide )
What Happens When Fax/Tel Mode is Selected
Type of call
Telephone charges
begin for the caller.
(Factory default setting =
8 sec.)
(Factory default setting =
22 sec.)
8-6 Receiving Faxes
, you can control precisely how the unit handles incoming calls by
setting).
setting).
Telephone
The unit listens for the fax tone.
(For 8 sec.)
The fax tone is not detected.
The unit starts ringing.
If you don't pick up the handset
(withing 22 sec.)
Choose between:
(factory default setting) and
(Factory default setting)
Not all fax machines are capable of sending a fax tone. For those cases if you set the
to
receiving the document. If no document comes in, it disconnects the call after
approximately 40 seconds.
Fax
Sending document
manually
The unit answers without ringing.
The fax tone is detected.
, the unit switches to receive mode automatically and starts
Software
Fax
Sending document
automatically
The document is
received automatically.
(The fax tone is detected
and the unit switches to
receive mode.)
Pick up the handset to
talk.
.
The unit disconnects the
call.
Chapter 8