Troubleshooting; Optional Accessories - Makita DX01 Instruction Manual

7. Remount the dust container in place on the attachment.
Replacing the sealing cap (Fig. 14)
Using a worn or damaged sealing cap may cause poor dust collection.
Check the sealing cap regularly. When the sealing cap is worn or damaged, replace it as follows.
1. Remove the sealing cap from the dust extraction system by hand.
2. Put a new sealing cap on the dust extraction system so that the protrusion on it is positioned on the upper side.
To maintain product SAFETY and RELIABILITY, any other maintenance or adjustment should be performed by Makita
Authorized Service Centers, always using Makita replacement parts.

TROUBLESHOOTING

Fault
Unusual dust emission

OPTIONAL ACCESSORIES

CAUTION:
•
this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use
accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
•
• Filter
NOTE:
• Some items in the list may be included in the tool package as standard accessories. They may differ from country
to country.
(Fig. 13)
Possible cause
The dust container is full.
The sealing cap is worn or
damaged.
Remedy
Emptying the dust container.
Replace the sealing cap.
7